Sprinkler inspection and testing that keeps the water flowing.
A sprinkler system sits silent for years — and the day it has to work is the worst day to find a stuck valve.
Acom inspects and tests your fire sprinkler system to NFPA 25, documents every valve and flow check, and keeps you ready for the fire marshal — so the water is there the moment a fire starts.
We’ve used this company since 2019 with no issues. Good service and friendly staff.
What we inspect and test
NFPA 25 covers the whole sprinkler system, not just the heads on the ceiling. Here’s what a complete inspection covers.
Control Valves
We verify every main and sectional valve is fully open and sealed, so water can actually reach the heads.
Heads & Piping
We inspect heads and pipe for corrosion, damage, paint, and obstructions that could block coverage.
Flow & Tamper Switches
We test water-flow and tamper switches to confirm a real flow signals the panel and the central station.
Fire Pump & Pressure
Where present, we run the fire pump and verify system pressure so the supply delivers when it’s called on.
Backflow & Drain Tests
We run the required main drain test and check the backflow preventer to confirm supply and flow are healthy.
Documentation & Reporting
You get a complete, dated NFPA 25 report that satisfies the fire marshal and proves the system was tested.
How a thorough inspection works
NFPA 25 sets the schedule and the scope for water-based fire protection — it’s not a quick walk-through and a signature. A real inspection tests the valves, flow, and pressure that decide whether water actually reaches a fire, and produces documentation that holds up with the authority having jurisdiction (AHJ). Here is how Acom runs it from arrival to report.
Records & system review
We pull your system records and last inspection so we know the system type, valves, and what’s due under NFPA 25.
Visual inspection
We check heads, piping, hangers, gauges, and valves for corrosion, damage, paint, leaks, or obstructions.
Valve & switch testing
We confirm control valves are open and supervised, and test flow and tamper switches against the panel and monitoring.
Flow, drain & pump tests
We run the main drain test, verify pressure, and exercise the fire pump where present to prove the supply performs.
Deficiency identification & repair
We flag anything failing or out of code, and our technicians can repair or replace it — often on the same visit.
Documentation & scheduling
We deliver a complete, AHJ-ready report and set your next inspection so you never miss a required interval.
From a single storefront to a multi-building enterprise campus, Acom inspects every account to the same code discipline — and keeps the documentation that proves it.
One partner for security, fire, and network
Most providers handle one piece. Acom designs and supports all three — so the systems that protect your business actually work together.
Security
Protect people and property with integrated systems.
- Intrusion detection
- Video surveillance
- Access control
- Automation & monitoring
Fire
Stay safe and compliant with full life-safety coverage.
- Fire alarm design & install
- Sprinkler & suppression
- Inspection & maintenance
- Testing & compliance
Network
Keep operations running with secure IT infrastructure.
- Managed IT services
- Cybersecurity
- Backup & disaster recovery
- VoIP & phone systems
Fewer vendors. One accountable partner.
When your security, fire, and network systems come from one team, there’s no finger-pointing and no gaps between providers. You get unified support, systems that integrate cleanly, and one number to call when it matters — backed by the same responsive team for the life of every system.
A system you can actually count on
You count on your sprinklers without ever thinking about them — until a fire, or an inspector, forces the question of whether they’d actually work.
A sprinkler system can look perfectly fine and still fail when it matters: a control valve left partly closed, a corroded head, low pressure, a flow switch that never signals. None of that shows on a quick glance — it shows up in a real NFPA 25 test. You need a partner who checks the valves, flow, and pressure, fixes what’s wrong, and hands you documentation that stands up when the fire marshal asks.
That’s the role Acom has played for Georgia businesses for more than 50 years. As one of the top 1% of alarm companies in the country, with certified technicians who do this every day, we bring the authority to keep your system truly compliant — and the responsiveness to make inspection one less thing you worry about.
Without the right partner, the cost shows up at the worst possible moment — a failed inspection and the fines that follow, a citation that threatens your certificate of occupancy, or a fire that spreads because the water never came. With lives in the building, the stakes here aren’t only financial; they’re human.
Our promise is simple — Protect. Manage. Respond. We protect the people in your building, manage your inspection schedule and compliance, and respond the moment something needs attention.
From an owner who assumes the sprinklers will work and hopes they’re right — to a leader who knows the valves are open, the system holds pressure, the report is on file, and the next visit is already on the calendar.
Our plan to get you there
- 1EvaluateWe assess your site, risks, and goals.
- 2InstallCertified pros deploy vetted equipment.
- 3Monitor & SupportWe watch over and service it for life.
Questions business owners ask us
NFPA 25 sets different intervals for different items — some checks are quarterly, others annual, and a few are on multi-year cycles. Your authority having jurisdiction may add requirements. We confirm the full schedule for your system.
A complete inspection checks heads and piping, verifies control valves are open and supervised, tests flow and tamper switches, runs the main drain test, and exercises the fire pump where present. You get a documented report, not just a tag on the riser.
No. Inspection and testing don’t discharge water from the heads — we test valves, switches, and flow through proper drains. We coordinate any test that affects flow or monitoring so there’s no surprise and no mess.
We document every deficiency and our certified technicians can often correct it on the same visit — opening a valve, replacing a head, or addressing a switch. You leave with the issues fixed and the paperwork to prove it.
Yes. You get a complete, dated NFPA 25 report that meets your authority having jurisdiction’s requirements — the record you need to show the system was inspected and is in compliance.
Yes. We inspect and service most commercial sprinkler systems regardless of who installed them. We’ll review your system and take over the inspection schedule from your current provider.
A lapsed inspection can mean code violations, fines, and trouble with your insurance or certificate of occupancy. We put you on a tracked schedule and remind you ahead of each due date so it doesn’t slip.
Make sure the water’s there when it counts
Schedule a sprinkler inspection. We’ll test your valves, flow, and pressure to NFPA 25, fix what needs fixing, and hand you the documentation that keeps you compliant and inspection-ready.